Adjusting Grinder Settings; Cleaning And Maintenance; Cleaning Table - Philips SAECO INCANTO HD8922 Mode D'emploi

English
14

Adjusting grinder settings

1
2

Cleaning and maintenance

Cleaning table

Part description
Brew group
Milk carafe
You can adjust the grinder settings by using the grind setting knob inside the
bean container.
Note: You can only adjust the grind settings when the machine is grinding
coffee beans.
Caution: Do not turn the grind setting knob more than one notch at a time to
prevent damage to the grinder.
1 Place a cup under the coffee dispensing spout.
2 Open the lid of the bean hopper.
3 Press the ESPRESSO button.
4 When the grinder starts grinding, press down the grind setting knob and
turn it to the left or right.
- There are 5 different grind settings you can choose from. The lower the
setting, the stronger the coffee.
Note: Consult the table below for when and how to clean all detachable
parts of the machine. For more detailed information on how to clean the
brew group and how to descale the machine, read the corresponding
chapters below or go to the dedicated website www.saeco.com/care.
When to clean
Weekly
Depending on the
type of usage
Monthly
After every use
Daily
Weekly
How to clean
Remove the brew group and clean it under the tap
(see 'Cleaning the brew group under the tap').
Lubricate the brew group (see 'Lubrication').
Clean the brew group with the coffee oil remover
tablets.
Perform the QUICK CARAFE CLEAN as indicated on
the machine after preparing a milk-based beverage
(see 'Carafe quick clean').
Clean the milk carafe thoroughly (see 'Thorough
cleaning of the milk carafe').
Disassemble the milk carafe and clean all parts under
the tap (see 'Weekly cleaning of the milk carafe').