Adjusting Machine Settings; Setting The Water Hardness; Adjusting Grinder Settings - Philips 4300 Série Mode D'emploi

English
14
1 Tap the profiles
different color.
2 Select a drink by tapping one of the one-touch drink icons or by tapping the 'More Drinks'
icon (specific types only).
3 Adjust the drink settings to your favorite taste.
4 Press start/stop
- Your new settings have now been stored in the colored profile you selected.
You can always restore the factory settings of the machine (see 'Restoring factory
settings').
Guest profile
Your machine is equipped with a guest profile. When the guest profile is selected, the profile
icon is off. When you select this profile, you can still personalize the settings to your own
preference but the recipes you brew will not be stored.

Adjusting machine settings

Setting the water hardness

We advise you to adjust the water hardness setting to the water hardness level in your
region for optimal performance and a longer lifetime of the machine. This also prevents you
from having to descale the machine too often. The default water hardness setting is 4: hard
water.
Use the water hardness test strip supplied in the box to determine the water hardness in
your region:
1 Immerse the water hardness test strip in tap water or hold it under the tap for 1 second (Fig.
23).
2 Wait 1 minute. The number of squares on the test strip that turn red indicates the water
hardness (Fig. 24).
Set the machine to the correct water hardness:
1 Tap the Settings
press the OK icon to confirm.
2 Use the up and down icons to select the water hardness level. The number of red squares
selected on the display should be the same as the number of red squares on the test strip
(Fig. 25).
3 When you have set the correct water hardness, tap the OK icon to confirm.

Adjusting grinder settings

You can change the coffee strength with the grind setting knob inside the bean container. The
lower the grind setting, the finer the coffee beans are ground and the stronger the coffee.
There are 12 different grind settings you can choose from.
icon repeatedly to select one of the colored profiles. All profiles have a
button to brew the drink you selected
icon and use the up and down arrows to select 'Water hardness'. Then