Brewing Drinks - Philips 4300 Série Mode D'emploi

English
10
Assembling LatteGo (specific types only)
Assembling the classic milk frother (specific types only)
2

Brewing drinks

General steps
1 Fill the water tank with tap water and fill the bean hopper with beans.
2 Insert the small plug into the socket located on the back of the machine. Insert the mains
plug into the wall socket.
3 Press the on/off button to switch on the machine.
- The machine starts heating up and performs the automatic rinsing cycle.
- When all lights in the drink icons light up continuously, the machine is ready for use.
4 Place a cup under the coffee dispensing spout. Slide the coffee dispensing spout up or
down to adjust its height to the size of the cup or glass you are using (Fig. 2).
1 min.
CLICK
1
5 sec. 30 sec.