Measuring Water Hardness; Brewing Drinks - Philips Saeco PicoBaristo SM5479 Mode D'emploi

ESPRESSO
COFFEE
AROMA
STRENGTH
1. On/off button
2. One-touch drink buttons
3. AROMA STRENGTH button

Measuring water hardness

Use the water hardness test strip supplied to set the water hardness. Press MENU button, select menu
and scroll to select water hardness.
1 Immerse the water hardness test strip in tap water for 1 second. Then wait for 1 minute.
2 Check how many squares have turned red.
3 Select the appropriate water hardness setting and press the OK button to confirm.
Number of red squares:
Value to be set

Brewing drinks

You can select a drink by pressing one of the one-touch drink buttons or by selecting another drink in
the menu.
- If you want to brew two cups, press the one-touch drink button of the selected drink twice or select
a coffee drink via the MENU and press it twice (Fig. 7). The machine automatically carries out two
grinding cycles in sequence for the selected drink. You can only brew two coffee drinks at the same
time.
- Slide the dispensing spout up or down to adjust its height to the size of the cup or glass you are
using.
Brewing coffee drinks
1 Fill the water tank with tap water and fill the bean hopper with beans.
2 To brew a coffee, press one of the one-touch drink buttons. To select another type of coffee, press
the MENU/SPECIAL DRINKS button, select DRINKS, scroll down to the desired drink and press the
OK button.
3 To stop dispensing coffee, press the OK button.
1
3
1
MENU /
SPECIAL DRINKS
5
4
4. MENU/ SPECIAL DRINKS button
5. Navigation icons (up, down, back, ok)
2 3
English
9
2
CAPPUCCINO
LATTE
MACCHIATO
CAFÉ
AU LAIT
4