Brewing Drinks - Philips 1200 Série Mode D'emploi

2. Activating the AquaClean water filter (5 min.)
Your machine is AquaClean enabled. Since your machine has to be completely limescale-free before
you start to use the AquaClean water filter, we advise you to start using the AquaClean filter from the
first day. You can purchase it from your local retailer, from authorized service centers or online at
www.philips.com/parts-and-accessories.
See chapter 'AquaClean water filter' for step-by-step instructions.
5 sec.
3. Setting the water hardness
See chapter 'Setting the water hardness' for step-by-step instructions. The default water hardness
setting is 4: hard water.
1 sec.

Brewing drinks

General steps
1 Fill the water tank with tap water and fill the bean hopper with beans.
2 Press the on/off button to switch on the machine.
-
The machine starts heating up and performs the automatic rinsing cycle. During heating up, the
lights in the drinks icons light up and go out slowly one by one.
-
When all lights in the drink icons light up continuously, the machine is ready for use.
3 Place a cup under the coffee dispensing spout. Slide the coffee dispensing spout up or down to
adjust its height to the size of the cup or glass you are using (Fig. 1).
30 sec.
OFF
1 min.
ON
=
3 sec.
English
9
3 sec.
3x