Dispensing Hot Water; Personalizing Drinks - Philips 4300 Série Mode D'emploi

1 Open the lid of the pre-ground coffee compartment and pour one leveled measuring
scoop of pre-ground coffee into it (Fig. 19). Then close the lid.
2 Tap one of the one-touch drink icons or tap the 'More Drinks' icon (specific types only) to
select another drink.
3 Select the pre-ground coffee function. You can do this in 2 different ways:
- use the down arrow to set the strength to the lowest level and then select the pre-ground
function.
- press the Settings
4 To stop dispensing coffee before the machine has finished, press the start/stop
again.
When you select the pre-ground coffee function:
- it is automatically stored.
- you can only brew one coffee at a time.
- you cannot select a different aroma strength.

Dispensing hot water

1 If attached, remove LatteGo or the milk frother.
2 Place a cup under the hot water spout.
3 Tap the 'Hot Water' icon (specific types only) or tap the 'More Drinks' icon (specific types
only) (Fig. 4) to select hot water.
4 Use the up and down arrows to adjust the hot water quantity and/or temperature to your
preference.
5 Press the start/stop
- Hot water is dispensed from the hot water spout (Fig. 20).
6 To stop dispensing hot water before the machine is finished, press the start/stop
again.

Personalizing drinks

The machine allows you to adjust the settings of a drink to your own preference and to store
the adjusted drink in a personal profile. The different profiles have different colors.
After selecting a drink by tapping one of the one-touch drink icons or by tapping the 'More
Drinks' icon (specific types only), you can do the following things:
1 adjust the aroma strength with the up and down icons (Fig. 21). There are 5 strengths, the
lowest is the mildest and the highest is the strongest.
2 adjust the coffee quantity (Fig. 22) and/or the milk quantity (specific types only) with the up
and down icons. There are 5 quantities for each of the settings.
As soon as the machine has finished brewing, the settings you selected will be stored
automatically in the profile you chose.
Select a profile
You can select a profile and store a recipe using My coffee choice profiles (My Coffee Choice
Profiles).
icon and use the down arrow to select the pre-ground function.
button.
English
13
button
button