Brewing Coffee With Beans - Philips 4300 Série Mode D'emploi

Masquer les pouces Voir aussi pour 4300 Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Brewing coffee with beans

1 To brew a coffee, tap the drink icon of your choice (Fig. 3) or tap the 'More Drinks' icon (Fig.
4) (specific types only).
- You can now adjust the drink to your personal taste (Fig. 5). Use the up and down arrows
(Fig. 6) to adjust the coffee strength. Tap the OK icon if you want to adjust more settings
(Fig. 7).
2 Press the start/stop
3 To stop dispensing coffee before the machine is finished, press the start/stop
again.
To brew 2 coffees at the same time, tap the drink icon twice or select the 2x icon scrolling
the dedicated bar.
Do not use caramelized or flavored coffee beans.
Brewing milk-based drinks with LatteGo (milk container)
LatteGo consists of a milk container, a frame and a storage lid. To avoid leakage, make sure
the frame and the milk container are properly assembled before you fill the milk container.
1 To assemble LatteGo, first insert the top of the milk container under the hook at the top of
the frame (Fig. 8). Then press home the bottom part of the milk container. You hear a click
when it locks into place (Fig. 9).
Note: Make sure that the milk container and the frame are clean before you connect them.
2 Slightly tilt LatteGo and put it on the hot water spout (Fig. 10). Then press it home until it
locks into place (Fig. 11).
3 Fill LatteGo with milk (Fig. 12). Do not fill the milk container beyond the maximum
indication.
If you have personalized the milk quantity, you may need to fill the milk container with
more or less milk than indicated for this drink on LatteGo.
Always use milk coming directly from the fridge for optimal results.
4 Place a cup on the drip tray.
5 Tap the milk-based drink icon of your choice or tap the 'More Drinks' icon (specific types
only) to select a different drink (see 'Personalizing drinks')
- You can now adjust the drink to your own preference.
6 Press the start/stop
- When you brew cappuccino, flat white or latte macchiato, the machine first dispenses
milk and then coffee. When you brew caffè latte or café au lait, the machine first
dispenses coffee and then milk.
- To stop dispensing milk before the machine has dispensed the preset amount, press the
start/stop
button.
7 To stop dispensing the complete drink (milk and coffee) before the machine is finished,
press and hold the start/stop
button at any time to start brewing the selected drink.
button.
button.
English
11
button

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

5400 série

Table des Matières