Adjusting Machine Settings - Philips 4300 Série Mode D'emploi

English
14
As soon as the machine has finished brewing, the settings you selected will be stored automatically
in the profile you chose.
Select a profile
You can select a profile and store a recipe using My coffee choice profiles (My Coffee Choice Profiles).
1 Tap the profiles
color.
2 Select a drink by tapping one of the one-touch drink icons or by tapping the 'More Drinks' icon
(specific types only).
3 Adjust the drink settings to your favorite taste.
4 Press start/stop
-
Your new settings have now been stored in the colored profile you selected.
You can always restore the factory settings of the machine (see 'Restoring factory settings').
Guest profile
Your machine is equipped with a guest profile. When the guest profile is selected, the profile icon is
off. When you select this profile, you can still personalize the settings to your own preference but the
recipes you brew will not be stored.

Adjusting machine settings

Setting the water hardness
We advise you to adjust the water hardness setting to the water hardness level in your region for
optimal performance and a longer lifetime of the machine. This also prevents you from having to
descale the machine too often. The default water hardness setting is 4: hard water.
Use the water hardness test strip supplied in the box to determine the water
hardness in your region:
1 Immerse the water hardness test strip in tap water or hold it under the tap for 1 second (Fig. 23).
2 Wait 1 minute. The number of squares on the test strip that turn red indicates the water hardness
(Fig. 24).
Set the machine to the correct water hardness:
1 Tap the Settings
OK icon to confirm.
2 Use the up and down icons to select the water hardness level. The number of red squares selected
on the display should be the same as the number of red squares on the test strip (Fig. 25).
3 When you have set the correct water hardness, tap the OK icon to confirm.
Adjusting grinder settings
You can change the coffee strength with the grind setting knob inside the bean container. The lower
the grind setting, the finer the coffee beans are ground and the stronger the coffee. There are 12
different grind settings you can choose from.
The machine has been set up to get the best taste out of your coffee beans. Therefore we advise you
not to adjust the grinder settings until you have brewed 100-150 cups (approx. 1 month of use).
icon repeatedly to select one of the colored profiles. All profiles have a different
button to brew the drink you selected
icon and use the up and down arrows to select 'Water hardness'. Then press the