Siemens HB 33 K Série Mode D'emploi page 76

Removal
Installation
76
1.
Press in the retaining clip with your thumb on one
side and disengage the inner door glass e.g.
with the spatula, then repeat on the other side.
(Fig. C).
Installation after cleaning:
1.
Insert inner door glass into the holder. First
engage the right side and then the other side.
(Fig. D)
2.
Push the top panel back in. Make sure that the
smooth surface is facing outwards.
3.
Replace the cover and screw it back on.
4.
Refit the oven door.
The oven must not be used again until the panels
have been correctly installed.