Step Command - Keysight Rp7971A Guide D'utilisation Et De Maintenance

5 SCPI Programming Reference

STEP Command

[SOURce:]STEP:TOUTput 0|OFF|1|ON
[SOURce:]STEP:TOUTput?
Specifies whether a trigger out is generated when a transient step occurs. A trigger is generated when
the state is on (true).
Parameter
0|OFF|1|ON, *RST OFF
Sets the step trigger signal to ON: STEP:TOUT ON
242
Typical Return
0 or 1
Keysight RP7970 & RP7980 Series Operating and Service Guide