Keysight RP7971A Guide D'utilisation Et De Maintenance page 31

[:LEVel] <value>{,<value>}
:POINts?
:STEP ONCE|AUTO
:TERMinate
:LAST 0|OFF|1|ON
:TOUTput
:BOSTep
[:DATA] <Bool>{,<Bool>}
:POINts?
:EOSTep
[:DATA] <Bool>{,<Bool>}
:POINts?
:VOLTage
[:LEVel] <value>{,<value>}
:POINts?
[SOURce:]
POWer
[:LEVel]
[:IMMediate]
[:AMPLitude] <value>
:TRIGgered
[:AMPLitude] <value>
:BWIDth
:LEVel <value>
:PARameter
:VMIN [<range>,] <value>
:LSENse [<range>,] <value>
:REPort? [<range>]
:LIMit?
:MODE FIXed|STEP|LIST|ARB
:SLEW
[:IMMediate] <value>
:MAXimum 0|OFF|1|ON
[SOURce:]
SASimulator
:ACTive
:MPP
:CURRent?
:POWer?
:VOLTage?
:BWIDth
Keysight RP7970 & RP7980 Series Operating and Service Guide
Specifies the setting for each list step.
Returns the number of power points.
Specifies trigger or dwell pacing.
Determines the output value when the list terminates.
Generates a trigger out at the Beginning Of STep
Returns the number of BOST points.
Generates a trigger out at the End Of STep
Returns the number of EOST points.
Specifies the setting for each list step.
Returns the number of voltage points.
Sets the output power when in power priority mode.
Sets the triggered output power.
Sets the bandwidth limit of power programming.
Sets the minimum voltage in power priority.
Sets the sense back inductance in power priority.
Returns the power bandwidth parameters
Returns the output power limit of the instrument.
Sets the transient mode.
Sets the power slew rate.
Enables or disables the maximum slew rate override.
Returns the current at the maximum power point.
Returns the maximum power point.
Returns the voltage at the maximum power point.
1 Quick Reference
31