Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4 Scope of delivery
The machine cutting torch is identified by a label on the handle tube, for example ABIPLAS
CUT MT 70.
4 Scope of delivery
The standard scope of delivery includes the following components:
• Cutting torch body (type as ordered)
• Cable assembly
Tab. 6
Scope of delivery
The order data and ID numbers for the equipment parts and wear parts can be found in the
current product catalogue. Contact details for advice and orders can be found online at
www.binzel-abicor.com.
5 Function
The torch and power source together form an operating unit which provides a plasma arc for
cutting when supplied with the appropriate operating resources. When cutting, compressed air
is ionised in the cutting nozzle by high-frequency pulses. The initial arc produces conductive
plasma, which is accelerated in the nozzle and directed to the workpiece. The working arc is
struck between the cutting torch electrode and the workpiece. The workpiece material is melted
by the energy of the impact, the dissociation and the ionisation and blown out by the kinetic
energy of the plasma jet. The compressed air is used to cool the cable assembly and the cutting
torch.
NOTICE
• In the case of a split protective cap, the cap body and spatter protector make up one
functional unit.
CAUTION
Risk of injury and device damage as a result of improper operation
Non-observance can result in injuries and device damage.
• For safety reasons, the plasma cutting torch equipped with the cap body must not be used
without a spatter protector.
EN - 8
• Handle
• Operating instructions
®
ABIPLAS
CUT
BAL.0099 • 2021-08-20
®
Publicité
Table des Matières
