Maintenance; Maintenance Schedule - Husqvarna 545FR Manuel D'utilisation

Masquer les pouces Voir aussi pour 545FR:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Move the product from side to side when you cut
grass. Use full speed.
Introduction
WARNING: Before you do maintenance, you
must read and understand the safety
chapter.

Maintenance schedule

Maintenance

Clean the external surface.
Examine the harness for damages.
Examine the quick-release mechanism on the harness for damages and make
sure that it operates correctly.
Do a check of the throttle trigger lockout and the throttle trigger. Refer to
check of the throttle trigger lockout on page 7 .
Make sure that the cutting attachment does not rotate at idle speed.
Do a check of the stop switch. Refer to
7 .
Examine the cutting attachment guard for damages and cracks.
Make sure that the saw blade or grass blade is attached correctly. Make sure
that the saw blade or grass blade is sharp and not damaged.
Examine the support flange for damages and cracks. Replace it if it is damaged.
Examine the trimmer head for damages and cracks. Replace it if it is damaged.
Examine the handle and the handlebar for damages and make sure that they are
attached correctly.
Tighten the locking screw fully for cutting attachments with a support cup.
Tighten the locknut fully for cutting attachments with a locknut.
22
To sweep the grass
The airflow from the rotating trimmer line can be used to
remove cut grass from an area.
1. Hold the trimmer head and the trimmer line parallel
2. Apply full throttle.
3. Move the trimmer head from side to side and sweep
Maintenance
For all servicing and repair work on the product, special
training is necessary. We guarantee the availability of
professional repairs and servicing. If your dealer is not a
service agent, speak to them for information about the
nearest service agent.
To do a check of the stop switch on page
to the ground and above the ground.
the grass.
WARNING: Clean the trimmer head cover
each time you assemble new trimmer line to
prevent unbalance and vibrations in the
handles. Also do a check of the other parts
of the trimmer head and clean it if
necessary.
Daily
X
X
X
To do a
X
X
X
X
X
X
X
X
X
X
Weekly
Monthly
1018 - 003 - 20.11.2019

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

545fx545fxt545rx545rxt545f

Table des Matières