Symbols On The Product - Husqvarna 545FR Manuel D'utilisation

7. Handle adjustment
8. Throttle trigger
9. Stop switch
10. Start throttle button
11. Throttle trigger lockout
12. Throttle wire adjustment
13. Suspension point
14. Fuel tank
15. Decompression valve
16. Muffler
17. Spark plug cap and spark plug, below the cover
18. Starter rope handle
19. Air purge bulb
20. Air filter cover
21. Choke control
22. Harness, safety-release mechanism
23. Harness, hip pad
24. Drive disc
25. Cutting attachment guard
26. Locknut
27. Support flange
28. Handlebar
29. Support cup
30. Transport guard
31. Locking pin
32. Operator's manual
33. Socket wrench

Symbols on the product

Be careful and use the product correctly.
This product can cause serious injury or
death to the operator or other.
Read the operator's manual carefully and
make sure that you understand the
instructions before use.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Maximum speed of the output shaft.
The product can cause objects to eject,
which can cause injury.
Keep a minimum distance of 15 m / 49 ft to
persons and animals during operation of the
product.
1018 - 003 - 20.11.2019
Risk of blade thrust if the cutting equipment
touches an object that it does not
immediately cut. The product can cut off
body parts. Keep a minimum of 15 m/49 ft
distance to persons and animals during
operation of the product.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
Air purge bulb.
Choke.
Fuel.
Decompression valve.
Heated handles.
Only use a flexible cutting wire. Do not use
metal cutting attachments. Apply this for
grass guard accessory.
yyyywwxxxx
Note: Other symbols/decals on the product refer to
certification requirements for other commercial areas.
The rating plate shows the
serial number. yyyy is the
production year and ww is
the production week.
3