Basic Assembly; Transporting The Device - Kinetec Centura B&W Manuel D'utilisation

Basic assembly

Remove all the components from their packaging.
• Install the column (37) on the base (1); align the nut (38) of the column with the hole (39) of the base; tighten the
screw (40) using the wrench (41) supplied with the machine.
• Install the power supply unit (42) on the column (37) with the joint (43) positioned on the side of the base (1) with
the longer feet; lock the knob (6).
• Install the motor (8). See page 17 for the correct position.
41

Transporting the device

44
Kinetec Centura B&W™
37
38
39
40
5
1
44
For easy transport of the unit, the base has 4 wheels with
brakes and a handle (44).
You can adjust the height of the handle with the knobs (5).
7/24
42
43
37
6
1
8
EN