Parkside Performance PABSP 20 Li C3 Instructions D'utilisation Et Consignes De Sécurité page 52

˜ Cleaning and care
m WARNING!
Always switch the product off, remove
the battery pack
product cool down before performing
inspection, maintenance and cleaning
work!
˜ Cleaning
NOTE
Do not use chemical, alkaline, abrasive or
u
other aggressive detergents or disinfectants
to clean this product as they might be
harmful to its surfaces.
Never allow fluids to get into the product.
The product must always be kept clean, dry
and free from oil or grease. Remove debris
from it after each use and before storage.
Regular and proper cleaning will help ensure
o
safe use and prolong the life of the product.
Clean the product with a dry cloth. Use a soft
o
brush for areas that are hard to reach.
In particular clean the air vents after every
o
use with a cloth and soft brush.
The vents must always be clear.
˜ Maintenance
Before and after each use, check the product
and accessories (e.g. accessory tools) for
wear and damage. If required, exchange
them for new ones as described in this
instruction manual. Observe the technical
requirements (see "Technical data").
˜ Repair
This product does not contain any parts that can
be repaired by the user. Contact an authorised
service centre or a similarly qualified person to
have it checked and repaired.
50 GB/IE
and let the
[ ]
˜ Storage
Push the rotation control switch
o
centre position to lock the on/off switch
Clean the product as described above.
o
Store the product and its accessories in a
o
dark, dry, frost-free, well-ventilated place.
Always store the product in a place that is
o
inaccessible to children. The ideal long term
storage (longer than 3 months) temperature is
between +20 and +26 °C.
Guide the drill bit into the bit holder
o
Store the product in its carrying case
o
Battery pack advice
Only store the battery pack
o
charged. The battery pack should be charged
to 40 to 60 % (red and orange LED in the
charge indicator
[
for extended periods.
Check the battery pack charge about every
o
3 months when storing for extended periods.
Recharge as necessary.
˜ Transportation
Push the rotation control switch
o
centre position to lock the on/off switch
Transport the product in its carrying case
o
Protect the product from any heavy impact
o
or strong vibrations which may occur during
transportation in vehicles.
Secure the product to prevent it from slipping
o
or falling over.
˜ Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
to the
5 ] [
6 ] [
.
8 ] [
.
[ ]
partially
[ ]
light up) before storing
]
to the
[ 5 ]
6 ] [
[
.
.
.
]