Assembly And Installation Instructions; Care And Maintenance Instructions - EXIT Toys Sniper Mode D'emploi

3.0 Assembly and Installation Instructions

• Adequate overhead clearance is essential. Provide clearance for wires, tree limbs,
and other possible hazards.
• Lateral clearance is essential. Place the Goal away from walls, structures, fences,
and other play areas. Maintain a clear space on all sides of the goal. A minimum
of 3m from frame edge is recommended.
• The goal is heavy, two able-bodied adults are required to set it up.
• Never set-up the goal in heavy rain, wind or storm conditions, especially storms.
It is recommended that the goal be taken apart and stored.
• When moving the assembled goal, have at least two people evenly the frame to
lift the goal off the ground.
• Place the goal on a level surface before use.
• Secure the goal against unauthorized and unsupervised use.

4.0 Care and Maintenance Instructions

Inspect the goal before each use and replace any worn, defective, or missing parts.
The following conditions could present potential hazards:
1. Missing, improperly positioned, or insecurely attached barriers or enclosure
2. Punctures, frays, tears, or holes worn in the goal mesh.
3. A bent or broken frame.
4. Sharp protrusions on the frame or suspension.
5. Loosened or missing hardware, system.
6