Assembly And Installation Instructions; Care And Maintenance Instructions - EXIT Toys Kickback Omni-Trainer Mode D'emploi

3.0 Assembly and Installation Instructions

• Adequate overhead clearance is essential. Provide clearance for wires, tree limbs,
and other possible hazards.
• Lateral clearance is essential. Place the rebounder away from walls, structures,
fences, and other play areas. Maintain a clear space on all sides of the rebounder.
A minimum of 3m from frame edge is recommended.
• Never set-up the rebounder in heavy rain, wind or storm conditions, especially
storms.
• When moving the assembled rebounder, have at least two people evenly the
frame to lift the reboundert off the ground.
• Place the rebounder on a level surface before use.
• Secure the rebounder against unauthorized and unsupervised use.

4.0 Care and Maintenance Instructions

Inspect the rebounder before each use and replace any worn, defective, or missing
parts.
The following conditions could present potential hazards:
1. Missing, improperly positioned, or insecurely attached frame or frame padding.
2. Punctures, frays, tears, or holes worn in the rebounder mesh.
3. A bent or broken frame or support system.
4. Sharp protrusions on the frame or suspension.
5. Loosened or missing hardware, system.
6