Assembly And Installation Instructions; Care And Maintenance Instructions - EXIT Toys TEMPO 1000 Rebounder Mode D'emploi

3.0 Assembly and Installation Instructions

• Adequate overhead clearance is essential. Provide clearance for wires, tree
limbs, and other possible hazards.
• Lateral clearance is essential. Place the Rebounder away from walls, structures,
fences, and other play areas. Maintain a clear space on all sides of the
rebounder. A minimum of 3 meter from frame edge is recommended.
• The rebounder is heavy, two able-bodied adults are required to set it up.
• Never set-up the rebounder in heavy rain, wind or storm conditions, especially
storms. It is recommended that the rebounder be taken apart and stored.
• When moving the assembled rebounder, have at least two people evenly the
• Place the rebounder on a level surface before use.
• Secure the rebounder against unauthorized and unsupervised use.

4.0 Care and Maintenance Instructions

Inspect the rebounder before each use and replace any worn, defective, or missing parts.
The following conditions could present potential hazards:
1. Missing, improperly positioned, or insecurely attached frame padding, barrier or
enclosure
2. Punctures, frays, tears, or holes worn in the rebounder mesh.
3. A bent or broken frame.
4. Sharp protrusions on the frame or suspension.
5. Loosened or missing hardware, system
TEMPO 1000
Rebounder
13