Assembly And Installation Instructions - EXIT Toys Scala Mode D'emploi

3.0 Assembly and Installation Instructions

• Adequate overhead clearance is essential. Provide clearance for wires, tree limbs,
and other possible hazards.
• Lateral clearance is essential. Place the Soccer Goal away from walls, structures,
fences, and other play areas. Maintain a clear space on all sides of the soccer
goal. A minimum of 3m from frame edge is recommended.
• The soccer goal is heavy, two able-bodied adults are required to set it up.
• Never set-up the soccer goal in heavy rain, wind or storm conditions, especially
storms. It is recommended that the soccer goal be taken apart and stored.
• When moving the assembled soccer goal, have at least two adults evenly lift the
frame of the soccer goal off the ground and move.
• Place the soccer goal on a level surface before use.
• Secure the soccer goal against unauthorized and unsupervised use.
• Always use anchors, see assembly instructions for the adequate
placement. p30
4.0 Care, Maintenance and storage Instructions
Inspect the soccer goal before each use and replace any worn, defective, or missing
parts.
The following conditions could present potential hazards:
1. Punctures, frays, tears, or holes worn in the soccer goal mesh.
2. A bent or broken frame.
3. Sharp protrusions on the frame or suspension.
4. Loosened or missing hardware, system.
5. Keep the goal stored out of reach of heavy wind or properly anchored.
6
Scala
Soccer goal