7.3. Taking photographs
Press the shutter release all the way down to take the
photograph. A tone indicates that the photo has been taken.
The photos are saved as JPEG files.
7.3.1. Using the flash
If there is insufficient light for the photo, the built-in flash can
provide the additional light required.
Press the "Flash" button repeatedly to choose between the
following flash settings:
Setting
The flash only works in single shot and self-timer mode. It cannot
be used for video recordings.
AUTO: The flash is activated automatically when
the shooting conditions require additional
lighting.
Flash always on
Flash always off
Meaning
DE
FR
NL
EN
231 of 264