6. First steps
6.1. Switching on the camera
Press the ON/OFF button for 1 to 2 seconds to turn the
camera on.
The ON indicator LED turns red for a moment and the display
comes on. The camera is then in operating mode.
PLEASE NOTE!
If the camera does not switch on, check whether the
batteries are inserted properly and whether or not
they are charged.
6.2. Switching off the camera
Press the ON/OFF button down for a little longer to switch
the camera off.
6.2.1. Energy-saving mode
If the camera is not used for 3 minutes, it switches off. You can
also set the automatic switch-off time to 1 minute or turn off this
function completely.
DE
FR
NL
EN
225 of 264