Publicité
EMU01155
Throttle Friction Adjusting Screw
A friction device in the remote control box
provides adjustable resistance to movement
of the remote control lever, and can be set
according to operator preference. An adjust-
ing screw is located on the front of the
remote control box.
Resistance
701035
Increase
Decrease
w
Do not overtighten the friction adjusting
screw. If there is too much resistance, it
may be difficult to move the lever, which
could result in an accident.
EMU00108
STEERING FRICTION ADJUSTING
SCREW (for Tiller control model)
A friction device provides resistance to steer-
ing movement. This is adjustable for operator
preference. An adjusting screw/bolt is locat-
ed on the swivel bracket.
EMU01296
Adjustment
Resistance
Increased
Decreased
w
Do
not
screw/bolt. If there is too much resis-
tance, it may be difficult to steer, which
408015
could result in an accident.
2-10
Screw
Turn clockwise
Turn counterclockwise
Screw/Bolt
Turn clockwise
Turn counterclockwise
over
tighten
the
GB
friction
Publicité
Chapitres
