Publicité
EMU01460
CHANGING GEAR OIL
w
8 Be sure the outboard is securely fas-
8 Never get under the lower unit while it
1) Tilt the outboard motor so that the oil
w
2) Place a suitable container under the
3) Remove the oil drain plug 1.
NOTE:
q
000682
The oil drain plug is magnetic. Remove all
metal particles from the plug before rein-
stalling it.
4) Remove the oil level plug 2 to allow the
cC
Inspect the used oil after it has been
drained. If the oil is milky, water is getting
into the gear-case which can cause gear
damage. Consult a Yamaha dealer for
repair of the lower unit seals.
NOTE:
For disposal of used oil consult your Yamaha
dealer.
4-21
tened to the transom or a stable stand.
You could be severely injured if the out-
board falls on you.
is tilted, even when the tilt-support
lever/knob is locked. Severe injury
could occur if the outboard accidentally
falls.
drain plug is at the lowest point possible.
gear-case.
oil to drain completely.
GB
Publicité
Chapitres
