Publicité
EMU00348
8 Flushing with the Flushing Attachment
w
Before using the flushing attachment,
remove the propeller. Keep yourself and
others away from the propeller shaft.
q
1) Fit the flushing attachment 1 (option) in
000420
position on the lower casing, with rubber
cups covering the cooling water inlet.
2) Connect a garden hose between the
flushing attachment and the water tap.
3) Shift into "NEUTRAL", and start the
engine while supplying water.
4) Run the engine at low speed for a few
minutes.
605014
4-7
GB
Publicité
Chapitres
