Publicité
EMU01411¯
CHECKING POINTS AFTER
STARTING ENGINE
8 After the engine has warmed up, check
that the engine idling speed is stable.
8 Check for a steady flow of water from the
cooling-water pilot hole.
cC
If water is not flowing out of the pilot hole
at all times while the engine is running,
do not continue to run the engine. Over-
heating and serious damage could occur.
Stop the engine and check if the water
inlet on the lower casing is blocked. If the
problem cannot be found and corrected,
consult your Yamaha dealer.
3-19
GB
Publicité
Chapitres
