Publicité
2-13
EMU00108
STEERING FRICTION ADJUSTING
SCREW (for Tiller control model)
A friction device provides resistance to
steering movement. This is adjustable for
operator preference. An adjusting screw/bolt
is located on the swivel bracket.
EMU01296
Adjustment
Resistance
Screw/Bolt
Increased
Turn clockwise
Decreased
Turn counterclockwise
WARNING
@
Do
not
over
screw/bolt. If there is too much resis-
tance, it may be difficult to steer, which
could result in an accident.
@
EMU01297
TRIM ANGLE ADJUSTING ROD
The position of the trim angle adjusting rod
determines the minimum trim angle of the
outboard motor in relation to the transom.
EMU00157
TILT SUPPORT LEVER
To keep the outboard motor in the tilted-up
position, lock the tilt support lever to the
clamp bracket.
GB
tighten
the
friction
Publicité
Chapitres
