Steering Friction Adjusting Screw; Steering Friction Adjusting Lever - Yamaha F9.9C Manuel D'utilisation

EMU00108
STEERING FRICTION ADJUSTING
SCREW(for Tiller control model)
A friction device provides resistance to
steering movement. This is adjustable for
operator
screw/bolt is located on the swivel brack-
et.
EMU01296
408032
Adjustment
Resistance
Increase
Decreased
w
Do not
screw/bolt. If there is too much resis-
tance, it may be difficult to steer, which
could result in an accident.
EMU01295
STEERING FRICTION ADJUSTING
LEVER
A friction device provides resistance to
steering movement. This is adjustable
according to operator preference.
Resistance
Increase
408033
Decrease
w
Do not overtighten the friction adjusting
lever. If there is too much resistance, it
may be difficult to steer, which could
result in an accident.
2-12
preference. An
Screw/Bolt
Turn clockwise
Turn counterclockwise
over tighten the
Lever
Turn to port
Turn to starboard
GB
adjusting
friction