Publicité
4-35
NOTE:
@
If a torque wrench is not available when you
are installing the drain plug, finger tighten
the bolt just until the gasket comes into con-
tact with the surface of the drain hole. Then
tighten 1/4 - 1/2 turn. Have the drain plug
torqued to the correct value with a torque
wrench as soon as possible.
@
4) Remove the oil filler cap 2. Add the cor-
rect amount of oil through the filler hole.
Reinstall the filler cap.
Engine oil grade/capacity:
Refer to "SPECIFICATIONS", page 4-1.
5) Start the engine and make sure that
there are no oil leaks.
6) Turn off the engine and wait 3 minutes.
Recheck the oil level in the oil level win-
dow to be sure the level falls between
the upper and lower marks. Fill with oil if
it is below the lower mark, or drain to the
specified level if it is above the upper
mark.
NOTE:
@
G
For disposal of used oil consult your
Yamaha dealer.
G
The oil should be changed more often
when the engine is operated under
adverse conditions such as extended
trolling.
@
GB
Publicité
Chapitres
