Hardening Of The Uv-Gel - SilverCrest SNS 45 A3 Mode D'emploi

GB

Hardening of the UV-Gel

140
NOTICE
Should any UV Gel a inadvertantly come onto the cuticle or the nail bed,
►
remove it before the hardening, for example, with a cotton wool swab.
♦
Repeat the above process for all nails.
e
i
NOTICE
Ensure that the nail is covered evenly with UV Gel a.
►
NOTICE
► See also the chapter Handling and operation.
♦
Switch the UV appliance 1 on with the ON/OFF switch 2.
♦
Press the Start button 0; the UV Lamps will be switched on.
♦
Now select the desired treatment time and then press the appropriate time
preselect button 9, 7 or 5. For the fi rst hardening we recommend the time
setting of 240 seconds.
♦
Hold your hand with the nails upward for the duration of the set treatment
time in the opening of the UV appliance 1.
♦
Treat the thumbnail separately because, when you hold your hand in the UV
unit, the UV light only shines on the side of it.
♦
Repeat the application of the UV gel a and the hardening in the UV appli-
ance 1 as described above once more.
SNS 45 A3