French-Nails; Removal Of Artifi Cial Nails - SilverCrest SNS 45 A3 Mode D'emploi

French nails
"French nails" means decorating the fi ngernails with a white tip.
♦
Model the nail as described in the chapter entitled "Application" until you
have applied the fi rst layer of UV gel a and hardened it.
♦
Use the round application side of the Spot swirl t to apply French gel s to
the nail tip. Always take up new French gel s with the point and model the
white nail tip with light circular movements.
♦
Proceed with the other nails in the same way.
♦
Now harden the nail using a setting of 150 seconds.
♦
Then apply an additional layer of UV gel a. Apply a little less UV gel a
to the white part of the nails than to the rest. This makes the transition to the
white tip disappear.
♦
Now harden the nail using a setting of 150 seconds. After the last hardening
of the gel layer, the nails may feel a little sticky ("sweat layer" or polymeriza-
tion layer).
♦
Moisten a cellulose pad z with fi nishing solution o and then wipe this over
the nail.
Removal of artifi cial nails
IMPORTANT
Risk of damaging the natural nail surface!
A forcible breaking-off of the nail tips i can cause damage to the natural nail
surfaces!
Do not break the nail tips i off of the natural nails.
►
Remove the nail tips i only in accordance with the following description.
►
♦
First trim the nails all the way back with the nail clippers q.
♦
Then fi le the nail tips i off with the sandpaper fi le u.
TIP
► After this, apply a little nail oil or use a rich hand cream for hands and
nails in order to care for your natural nails.
SNS 45 A3
GB
143