Installation; Positioning The Unit; Installation Modes; Minimum Installation Distances - Panasonic Aquarea Air U.M. Manuel D'installation

INSTALLATION

2.1

Positioning the unit

Avoid installing the unit in proximity to:
- positions exposed to direct sunlight;
- proximity to external sources of heat;
- In damp areas or places where the external parts of the
unit may come in contact with water.
- in places with oil fumes
- places subject to high frequencies.
Make sure that:
- the wall on which the unit is to be installed is strong
enough to support the weight;
2.2

Installation modes

The following descriptions of the various mounting
procedures and corresponding details, refer to a version
of the machine with fixtures on the left.
The operations for the mounting of machines with fixtures
on the right are exactly the same.
Only the images are to be considered as a mirror image.
To ensure that the installation is performed correctly and
2.3

Minimum installation distances

Figure indicates the
between the wall-mounted cooler-convector and furniture
present in the room.
6
INSTALLATION
minimum mounting distances
- the part of the wall being used does not have pipes or
electric wires passing through;
- the wall being used is perfectly flat;
- there is an area free of obstacles which could interfere
with the inlet and outlet air flow;
- the wall being used is preferably an outside perimeter
wall to allow for the discharge of condensation;
that the appliance will perform perfectly, carefully follow
the instructions indicated in this manual. Failure to respect
the rules indicated can not only cause malfunctions of the
appliance, but will also invalidate the warranty, and hence
negate responsibility for damage to persons, animals or
property.
U I S