Cleaning Air Suction Filter - Panasonic Aquarea Air U.M. Manuel D'installation

INSTALLATION
2.13

Cleaning air suction filter

After a period of continuous operation and depending on
the concentration of impurities in the air, or when restarting
Extraction of filter cells
- extract the front grill by lifting it slightly and turn it until it
comes right out of its seat;
A front grille
B
See grid
Cleaning filtering seats
- suck up the powder with a vacuum cleaner
- wash the filter with running water without using
detergents or solvents, and leave to dry.
- Remount the filter on the cooler-convector (fig. 32 ref.
A), taking care to insert the lower flap
into its seat.
A filter
B lower edge
10
the systems following a long period of inactivity, proceed
as described.
-
C
D
A
C
It is forbidden to use the unit without the net filters.
The appliance is fitted with a safety switch that
prevents the operation of the cooler with the mobile
panel missing or out of position.
After finishing the cleaning of the filter, check that the
panel is mounted correctly.
C
A B
extract the filter, pulling it horizontally outwards.
filter
extraction filter
B
D
The filter housing
B C
U I S