General Assembly And Maintenance Tips - Horizon Hobby ParkZone F4F Wildcat BNF Manuel D'utilisation

General Assembly and Maintenance Tips

Note: This checklist is not a replacement for the content included in this manual. Although it can be used as a quick start guide, you
should read the entire manual before proceeding.
First Flight Preparation

Remove and inspect contents
Begin charging flight battery
Assemble F4F Wildcat
Install receiver
Install fully charged battery
Bind the receiver to a transmitter, if applicable
Perform the Control Direction Test with the transmitter
Adjust flight controls and transmitter
Perform a radio system Range Check
Find a safe and open flying field
Plan flight for flying field conditions
Maintenance After Flying

Disconnect flight battery from ESC
Turn off transmitter
Remove flight battery from aircraft
Recharge flight battery
Clean aircraft (wipe off dirt, etc.)
Repair or replace all damaged parts
Carefully disassemble and store aircraft
Store flight battery apart from aircraft and monitor the battery charge
Make note of flight conditions and flight plan results, planning for future flights
Activity
Activity
(Required for Safety)
(Required for Safety)
EN
PNP BNF
u u
u u
u u
u
u u
u u
u u
u u
u u
u u
u u
PNP BNF
u u
u u
u u
u u
u u
u u
u u
u u
u u
5