Publicité
Les langues disponibles
Les langues disponibles
Operation
Installing the Battery
Pack(s)
Important:
Use a battery pack only in
temperatures that are within the appropriate
range; refer to
Specifications (page
1.
Make sure that the vents on the battery are clear
of any dust and debris.
2.
Lift up the battery-compartment lid (A of
7).
3.
Line up the cavity in the battery pack with the
tongue on the machine and slide the battery
pack into the compartment until it locks into
place (B of
Figure
4.
Close the battery-compartment lid (C of
7).
Note:
Ensure that the battery-compartment lid
is completely closed and snapped into place
before starting the machine.
11).
7).
Figure 7
Starting the Machine
1.
Ensure that the battery pack (or battery packs)
are installed in the machine; refer to
the Battery Pack(s) (page
2.
Insert the electric-start button into the electric
starter (A of
3.
Squeeze the bail and hold it to the handle (B
and C of
Note:
turn on and the battery-charge indicator lights on
the battery illuminate.
Figure
4.
Press the electric-start button until the motor
starts (D of
Figure
Note:
This is a ground-engaging machine; rotor
contact with the ground is intentional and propels the
machine forward.
g381640
12
12).
Figure
8).
Figure
8).
When you squeeze the bail, the lights
Figure
8).
Figure 8
Installing
g288479
Publicité
