Télécharger Imprimer la page

Kärcher RCF 3 Mode D'emploi page 23

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
ATTENTION
Damage caused by washing the cleaning roller with
fabric softener or using a tumble dryer
Damage to the microfibres
Do not use fabric softener when cleaning in a washing
machine.
Do not dry the roller in a tumble dryer.
ATTENTION
Material damage due to loose roller
This may damage the washing machine.
Place the roller in a laundry net and load the washing
machine with extra laundry.
1. Press the roller cassette unlocking button.
The roller cassette detaches from the cleaning ro-
bot.
2. Remove the roller cassette from the cleaning robot.
Illustration R
3. Fold up the Scraper unit.
4. Remove the cleaning roller from the roller cassette.
Illustration S
5. Clean the cleaning roller under running water or
wash it in the washing machine at max. 60 °C.
Illustration T
6. Clean the roller drive with a moist cloth.
7. Allow the cleaning roller to air dry.
Cleaning the scraper unit with hair comb
ATTENTION
Adhering dirt deposits
Adhering dirt deposits can damage the device in the
long term.
It is recommended to clean the device completely after
each application.
ATTENTION
Adhering dirt deposits
Adhering dirt deposits can damage the device in the
long term.
Clean the scraper unit regularly with the cleaning tool.
ATTENTION
Damage due to cleaning the scraper unit in a dish-
washer
The washing process can distort the scraper unit and it
will no longer press on the roller correctly. This worsens
the cleaning result.
Do not clean the scraper unit in a dishwasher but rather
under running water.
Malfunctions often have simple causes that you can
remedy yourself using the following overview. When in
Fault
The LED display indica-
tor "Robot status" flash-
es red
Troubleshooting guide
Cause
The battery is discharged.
The cleaning robot is to be switched off
and is standing on the charging station.
The fresh water tank is not sitting proper-
ly in the device.
The cleaning roller is not fitted properly in
the device.
The cleaning roller is caught or blocked. 1. Remove the cleaning roller and insert it
1. Press the roller cassette unlocking button.
The roller cassette detaches from the cleaning ro-
bot.
2. Remove the roller cassette from the cleaning robot.
Illustration R
3. Fold up the Scraper unit.
4. Remove the cleaning roller from the roller cassette.
Illustration S
5. Clean the Scraper unit under running water.
6. Remove stubborn dirt with the cleaning tool.
Illustration U
7. Fold down the Scraper unit.
8. Pay attention to the cassette guide and push the
roller cassette into the cleaning robot until it audibly
engages.
Illustration J
Dirt particles (such as sand, etc.) can get stuck on the
running surface and then damage sensitive, smooth
floor surfaces.
1. Clean the running surface of the wheels with a damp
cloth.
Cleaning and care agents
ATTENTION
Use of unsuitable detergents and care agents
The use of unsuitable detergents and care agents can
damage the device and loss of eligibility for warranty
claims.
Use only KÄRCHER detergents.
Take care to ensure the correct dosage.
Note
Use KÄRCHER detergent or care agents for floor clean-
ing as necessary.
 Observe the manufacturer's dosing quantity recom-
mendations when dosing with detergent or care
agents.
 To prevent foaming, fill the fresh water tank with wa-
ter first and the add the detergent or care agent.
 To prevent the tank from overflowing, be sure to
leave enough space for the detergent or care agent
when filling with water.
Replacing the cleaning roller
A worn cleaning roller can worsen the cleaning result.
1. Check the cleaning roller regularly for wear and re-
place if necessary.
doubt, or in the case of malfunctions not mentioned
here, please contact your authorised Customer Service.
Rectification
1. Charge the battery.
1. Switch off the cleaning robot when it is not
on the charging station
1. Remove the fresh water tank and then fit it
back in place. Insert the fresh water tank so
that it is firmly fitted in the device.
1. Fit the cleaning roller correctly in the de-
vice.
correctly into the device.
English
Cleaning the wheels
23

Publicité

loading