Product Description And Specifications; Intended Use; Product Features - Bosch IXO Notice Originale

OBJ_DOKU-41216-001.fm Page 29 Thursday, October 16, 2014 4:54 PM
technician and only using original spare parts. Damaged battery charg-
ers, cables and plugs increase the risk of an electric shock.
 Do not operate the battery charger on easily inflammable surfaces
(e. g., paper, textiles, etc.) or surroundings. The heating of the battery
charger during the charging process can pose a fire hazard.
Products sold in GB only: Your product is fitted with a BS 1363/A approved
electric plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be cut off and an
appropriate plug fitted in its place by an authorised customer service agent.
The replacement plug should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible shock hazard and
should never be inserted into a mains socket elsewhere.

Product Description and Specifications

Intended Use

The machine is intended for driving in and loosening screws.
The light of this power tool is intended to illuminate the power tool's direct ar-
ea of working operation and is not suitable for household room illumination.

Product Features

The numbering of the product features refers to the illustration of the ma-
chine on the graphics page.
1 Screwdriver bit*
2 Tool holder
3 Rubber cap
4 Battery charge-control indicator
5 Rotational direction switch
6 Suspension hook
7 On/Off switch
Bosch Power Tools
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
1 609 92A 0W7 | (16.10.14)
English | 29