Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch IXO Notice Originale

OBJ_DOKU-41216-001.fm Page 36 Thursday, October 16, 2014 4:54 PM
36 | English

Maintenance and Service

Maintenance and Cleaning

 Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational direc-
tion switch to the centre position. Unintentional actuation of the On/Off
switch can lead to injuries.
 For safe and proper working, always keep the machine and ventila-
tion slots clean.
When the battery is no longer operative, please refer to an authorised after-
sales service agent for Bosch power tools.
If the replacement of the supply cord is necessary, this has to be done by
Bosch or an authorized Bosch service agent in order to avoid a safety hazard.
If the machine should fail despite the care taken in manufacturing and testing
procedures, repair should be carried out by an after-sales service centre for
Bosch power tools.
In all correspondence and spare parts order, please always include the
10-digit article number given on the type plate of the machine.

After-sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance
and repair of your product as well as spare parts. Exploded views and infor-
mation on spare parts can also be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions concerning our
products and their accessories.
1 609 92A 0W7 | (16.10.14) Bosch Power Tools