Product Description And Specifications; Product Features; Technical Data - Bosch EXACT ION 18 V-LI 2-700 Notice Originale

All manuals and user guides at all-guides.com
The dust produced by sanding,
WARNING
sawing, grinding, drilling and
other similar activities may cause cancer, congenital de-
fects or genetic mutations. Some of these dusts contain
substances such as:
Lead in lead-based paint and varnish; crystalline silica in
bricks, cement and other building materials; arsenic and
chromate in chemically treated wood. The risk of becoming
ill depends on how frequently you are exposed to these sub-
stances. To reduce the potential danger, you should always
wear adequate personal protective equipment (e.g. specially
made breathing apparatus that can filter out even the smal-
lest of dust particles) and work only in well-ventilated areas.
Avoid switching on the tool accidentally. Make sure
u
that the on/off switch is set to the off position before
inserting a battery. Accidents can occur as a result of
carrying the power tool with your finger on the on/off
switch or inserting the battery while the power tool is
switched on.
Do not use application tools that are worn or in other-
u
wise less than perfect condition. Defective application
tools can break, for example, causing material damage
and personal injury.
When fitting an application tool, make sure that it is
u
held securely in the tool holder. If the application tool is
not held securely in the tool holder, it may become loose
and consequently uncontrollable.
Be careful when screwing in long screws – there is a
u
risk of slipping when using particular screws and ap-
plication tools. Long screws are often difficult to control
and there is a danger that you will slip and hurt yourself
when screwing them in.
Check which rotational direction is set before switch-
u
ing on the power tool. If you want to loosen a screw but
the rotational direction is set to tighten the screw, for ex-
ample, the power tool may move violently and uncontrol-
lably.
Do not use the power tool as a drill. Power tools with a
u
shut-off clutch are not suitable for drilling. The clutch can
shut off automatically and without warning.

Technical data

Industrial cordless screwdriver
EXACT ION
Article number 3 602 D94
Rated voltage V=
Torque, hard/ Nm
soft screwdriv-
ing application
Bosch Power Tools
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for tightening and loosening
screws, bolts, nuts and other threaded connectors in the
specified power and dimension ranges.
The power tool is suitable only for use in industrial environ-
ments.
The power tool is not suitable for use as a drill.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Tool holder
(2) Quick-change chuck
(3) Worklight
(4) Slider for preselecting the torque
(5) On/off switch
(6) Rotational direction switch
(7) Battery charge indicator
(8) LED indicator for screwdriving applications
(9) Battery
(10) Battery release button
(11) Hanging hook
(12) Attachment slots for hanging hook
(13) Application tool
(14) Adjustment tool
(15) Setting disc
(16) Marking ring
(17) Handle (insulated gripping surface)
A) Accessories shown or described are not included with the
2–700 4–2000 6–1500
3 602 D94 3 602 D94
400 401
18 18
0.5–2 1.5–4
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
A)
A)
A)
product as standard. You can find the complete selection of
accessories in our accessories range.
8–1100 12–450
3 602 D94 3 602 D94
402 403
18 18
1.5–6 2–8
1 609 92A 4R0 | (25.02.2019)
English | 15
12–700
3 602 D94
405 404
18 18
2–12 2–12