dB Technologies VIO x315 Manuel D'utilisation page 27

Italiano
2. FIRST POWER-ON
PACKAGE CONTENTS
On opening the VIO X315 speaker package, check that no items are missing. The package contains:
• power cable with powerCON® TRUE1 connector
• VIO X315 loudspeaker
• quick start manual and warranty documentation
USE
CONNECTING AND LINKING THE POWER SUPPLY
On the VIO X315, you can link the power supply from the first speaker to the next, up to a total of 8 (7+1) in countries
with a 220–240Vac mains supply, and up to 5 (4+1) in countries with a 100–120Vac mains supply.
To supply power, simply connect the power cable provided to the MAINS INPUT on the first speaker and connect a
second cable with suitable connectors (optional) from the MAINS LINK output to the MAINS INPUT of the next speaker.
Repeat the connection to supply up to the maximum permissible current specified on the MAINS LINK connector of the
first speaker.
LOUDSPEAKER 1
CONNECTING AND LINKING THE AUDIO SIGNAL
When connecting the system audio signal, connect the sound source to the "INPUT" of the first speaker first of all.
Then connect a balanced XLR cable from the "OUTPUT LINK" of the first monitor to the "INPUT" of the second,
and so on.
VIO X315
LOUDSPEAKER 1
LOUDSPEAKER 2
LOUDSPEAKER 2
Cod. 420120425 REV. 1.0
27