dB Technologies VIO x315 Manuel D'utilisation page 21

Italiano
1. GENERAL INFORMATION
WELCOME!
Thanks for purchasing a product that was designed and developed in Italy by dBTechnologies! This professional
speaker embodies years of experience and innovation in the field of sound reproduction, with the use of cutting
edge solutions in the fields of acoustics, electronics and materials research.
INTRODUCTORY OVERVIEW
VIO X315 is a highly versatile 3-way point source active speaker. It can be installed on a pole or suspended from
eyebolts; the built-in handles make it easy to transport. The low frequencies are handled by the 15" neodymium
woofer (4" V.C.), while the MF-HF coaxial driver is the same as that used on the VIO L1610 line array system. These
components ensure extremely detailed and faithful reproduction over the whole audible spectrum, especially in
the most critical part, the mid-frequency range.
The main features of VIO X315 are:
• quick and easy installation
• easy to transport
• great versatility
• newly designed internal amplifier
• high sound powers
USER INFORMATION
To use your VIO X315 speaker in the best way, we recommend that you:
• read the Quick Start manual included in the package and all of this User Manual, and keep them
throughout the entire life of the product.
• register the product in the "SUPPORT" section at the http://www.dbtechnologies.com website.
• download and install the latest version of the firmware from the "DOWNLOADS" section of the http://www.
dbtechnologies.com website (see the
• keep proof of purchase and the WARRANTY (User manual "section 2").
VIO X315
UPDATING THE FIRMWARE chapter).
Cod. 420120425 REV. 1.0
21