Télécharger Imprimer la page

dB Technologies VIO x315 Manuel D'utilisation page 2

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EMI CLASSIFICATION
According to the standards EN 55032 and 55035 this is a class A equipment, designed and suitable to operate in
residential environments.
FCC CLASS A STATEMENT ACCORDING TO TITLE 47, PART 15, SUBPART B, §15.105
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense
WARNING: Make sure that the loudspeaker is securely installed in a stable position to avoid any injuries or dam-
ages to persons or properties. For safety reasons do not place one loudspeaker on top of another without proper
fastening systems. Before hanging the loudspeaker check all the components for damages, deformations, missing
or damaged parts that may compromise safety during installation. If you use the loudspeakers outdoor avoid spots
exposed to bad weather conditions. Contact dB Technologies for accessories to be used with speakers. dBTech-
nologies will not accept any responsibility for damages caused by inappropriate accessories or additional devices.
Features, specification and appearance of products are subject to change without notice. dBTechnologies reserves the right to
make changes or improvements in design or manufacturing without assuming any obligation to change or improve products
previously manufactured.
WARNING
Only expert personnel may use the product and its accessories! To prevent hazards to people, animals and/or objects, make sure that
the installation is stable and secure. Comply with the safety regulations and laws in force in the country in which you use the product.
For safe use, periodically check that all parts are in good working condition before use. Only authorised personnel may carry out de-
sign, calculations, installation, testing and maintenance of professional flown or stacked audio systems. AEB Industriale shall not
be liable for improper installation carried out without adequate safety measures. Never suspend the speakers from the handles!
Only use the accessories and configurations described in this manual, and proceed in accordance with the instructions given in the
manuals for the accessories. Do not obstruct the amplifier cooling fins at the back. In the event of overheating, the audio volume is gra-
dually reduced until the module is thermally stable. The level is automatically restored on reaching the correct operating temperature.
Do not attempt to open the amplifier. In the event of malfunction, immediately turn off the power, disconnect the unit from the mains and
contact an authorised service centre. Only use the power cable provided. The USB SERVICE DATA connection is to be used exclusively for upda-
ting the product's firmware; do not connect any other USB device to the unit to avoid the risk of damage and malfunction. Do not use the
monitor for a prolonged period with the limiter LED steadily lit or flashing as this indicates operation under stress with excessive distortion.
Check periodically the integrity and the functionality of the accessories and the technical equipments for a safe installation. user should never
apply a load that exceeds the working load limits of any rigging components or equipment here presented. design, calculation, installation,
testing and maintanance of suspension and stack systems for audio equipment must be performed only by qualified and authorized personnel.
AEB Industriale s.r.l. denies any and all responsibility for improper installations, in the absence of safety requirements.
Cod. 420120425 REV. 1.0
VIO X315
II

Publicité

loading