Benelli 502C Mode D'emploi page 150

If necessary, remove the coolant reservo-
ir cap, add coolant to the maximum level
mark, and then install the cap.
13. Start the engine, and then check the
vehicle for coolant leakage.
If coolant is leaking, have a Benelli dealer
check the cooling system.
Air lter element
The air lter element must be replaced
at the intervals speci ed in the periodic
maintenance and lubrication chart.
Have a Benelli dealer replace the air lter
element.
Checking the engine idling speed
Check the engine idling speed by a Benelli
dealer.
Engine idling speed:
1400-1600 r/min.
6 - 15
Periodic maintenance and adjustment
EN
6