Benelli 502C Mode D'emploi page 133

Operation and important riding points
Shifting
EN
5
1
1. Shift pedal
2. Neutral position
Shifting gears lets you control the amount
of engine power available for starting o ,
accelerating, climbing hills, etc.
The gear positions are shown in the illu-
stration.
TIP
To shift the transmission into the neutral
position, press the shift pedal down repe-
atedly until it reaches the end of its travel,
and then slightly raise it.
NOTICE
6
• Even with the transmission in the
neutral position, do not coast for
5
long periods of time with the engi-
4
ne o , and do not tow the motor-
cycle for long distances. The tran-
3
smission is properly lubricated
2
only when the engine is running.
Inadequate lubrication may da-
N
2
mage the transmission.
1
• Always use the clutch while chan-
ging gears to avoid damaging the
engine, transmission, and drive
train, which are not designed to
withstand the shock of forced shi-
fting.
Tips for reducing fuel consumption
Fuel consumption depends largely on
your riding style. Consider the following
tips to reduce fuel consumption:
5 - 2
• Shift up swiftly, and avoid high engi-
nespeeds during acceleration.
• Do not rev the engine while shifting
down, and avoid high engine speeds
with no load on the engine.
• Turn the engine o instead of letting
it idle for an extended length of time
(e.g., in tra c jams, at tra c lights or
at railroad crossings).