Parkside PISG 80 A2 Instructions De Montage, D'utilisation Et Consignes De Sécurité page 31

... / Maintenance ... / Environmental instructions ... / Information about warranty ...
Weld penetration
Weld width
Welding bead
Weld imperfections
Note: Determine which welding method is more
suitable for yourself after welding a test piece.
Maintenance and Cleaning
Note: The welding tool requires regular maintenance
and reconditioning to work properly and to comply
with safety requirements. Improper and incorrect
operation may result in malfunctions and damage
the tool.
Current regulators, earthing equipment, internal
cables, the blowpipe coupler and adjusting
screw should be maintained regularly. Tighten
loose screws and replace rusty screws
281479_Inverter Schweissgeraet PISG 80 A1_content_OS.indd 31
All manuals and user guides at all-guides.com
Towards the unwelded
part:
larger
flatter
greater
Towards the welded part:
less
Regularly check the leakage resistance of the
welding tool. Use suitable measuring instruments
for this purpose.
In the event of a defect or if components need
to be replaced, please contact the correspond-
ing professional.
Environmental instructions
and disposal information
Don't waste,
recycle!
Device, accessories and packaging
should be recycled in an environmen-
tally friendly manner.
Do not dispose of the inverter welder equipment with
your household waste, or throw into fire or water. If
possible, non-operational equipment should be re-
cycled. Contact your local retailer for information.
Information about warranty
and service processing
Creative Marketing Consulting GmbH
warranty
greater
smaller
higher
less
GB/IE 31
28.12.16 12:19