Benelli Tornado Naked TRE TR 160 2011 Manuel De L'utilisateur page 156

5 • ADJUSTMENT
5.4.1 Adjusting rear suspension spring preload
Adjust the spring preload by means of the two ring nuts (A and B) shown in the figure.
Unloose the ring nut (A) and adjust the preload using the ring nut (B).
Turn clockwise for a stiffer preload.
Turn anticlockwise for a softer preload.
Once the adjustment is over, tighten the ring nut (A).
5.4.2 Adjusting rear suspension rebound damper hydraulic device
Adjusting of the rebound damper hydraulic device is madein jerks.
Turn the rule (C) clockwise to increase thebraking action, or turn anticlockwise to decrease it.
All manuals and user guides at all-guides.com
5.4.1
55
ADJUSTMENT
5.4.2