Benelli Tornado Naked TRE TR 160 2011 Manuel De L'utilisateur page 139

All manuals and user guides at all-guides.com
OPERATION
4 • OPERATION
Set "Clock" / "Trip"
Move to the visualisation 3.
To set the timer, push the START button for two seconds at least. The first number starts flashing.
Press continuously the START button for the number regulation until reaching the number you desire. Repeat the same operation to
set the second timer number, the first and the second minutes number. Press the START button for three seconds at least, to stop
the selection and the flashing. To reset the "Trip" from the visualisation 3 press two times the start START button.
Set "Km" / "Mi"
From the 1 "Total" / "Trip" visualisation, when the motor is switched on, press the START button for at least ten seconds.
The Km or Mi symbol will start flashing, press the START button to move to Km or Mi, press for at least two seconds theSTART button, to
select the measure unit you desire, moving automatically to the °C o °F selection, press the START button for less than one second to
select the temperature unit you desire. Press the START button for at least three seconds, to confirm and exit from the Set "Km" / "Mi"
visualisation.
38