Benelli Tornado Naked TRE TR 160 2011 Manuel De L'utilisateur page 137

4 • OPERATION
4.4 Selecting the display functions
ATTENTION
The display modification or regulationoperations, must be made 3 seconds after the motor starting.
The display is provided with 3 main functions:
1) "TOTAL"/"TRIP"
2) "CHRONO"/"LAP"
3) "CLOCK"/"TRIP"
To move from the visualisation 1 "Total"/"Trip" to the button for more than 2 seconds.
To move from the visualisation 2 "Chrono"/"Lap" to the visualisation 3 press the"Start" button for more than two seconds (when the
chronometer is switched off).
To switch from function 3 to function 1, keep pressed the"Start" button for less than two seconds.
(Start>2sec)
All manuals and user guides at all-guides.com
(Start>2sec with chronometer o )
36
OPERATION
(Start<2sec)