Publicité
Les langues disponibles
Les langues disponibles
Error messages and Trouble shooting
Er1 - The inserted test strip has been used or damaged. Please use a
new test strip from vial.
Er2 - Meter has malfunctioned. Do the Quality Control Test or reinstall
the batteries to check if the meter works properly.
Er3 - Signal transmission is disrupted, repeat the test.
Er4 - Applied blood volume is insufficient, please repeat the test with
a new test strip.
Above, if error screen still appears contact your local Bionime
Customer Service.
44
All manuals and user guides at all-guides.com
Error messages and Trouble shooting
Battery Error
1. The "
" symbol is blinking when the battery power is low. Please change the meter battery as
soon as you can. You can still do the test.
2. The "
" and "
" symbols are blinking when the battery is too low. Meter can not do the
strip test. Please change the
meter
battery immediately.
1a
1b
2
NOTE
- When meter backlight has no function, you cannot see the backilght, please change your
backlight battery.
- When the backlight battery is runnign out of power, your meter still works properly but
without backlight function.
45
Publicité
