Publicité
Les langues disponibles
Les langues disponibles
Setting Up Your Meter- Setting the Time, Volume and Date
4. Time format 12/24H selection
With the time format blinking, press the Left or Right button
to adjust it. Then press the Main button to confirm it and
move to hours setting.
5. Hour setting
With the hour blinking, press the Left or Right button until
the current hour appears. Then press the Main button to
confirm it and move to minute setting.
6. Minute setting
With the minute blinking, press the Left or Right button to
adjust it. Then press the Main button to confirm it.
Meantime, it will shift to next digit for setting. Repeat the
above action until the minute setting is completed. Then it
will move to volume setting.
7. Volume setting
With the volume blinking, press the Left or Right button to
turn it on or off. Then press the Main button to confirm and
finish the settings.
20
All manuals and user guides at all-guides.com
4a)
4b)
5)
6)
7a)
7b)
Setting Up Your Meter- Setting the Time, Volume and Date
8. Ending setting
After volume settings, for confirmation you will hear a beep (if volume is
turned on). All the settings are saved and completed and will return to time
screen. (If Volume is turned off, the display will directly return to time screen
without a sound of "beep".)
NOTE
- When you do not do any settings of meter for over 2 minutes, the meter will leave setting
mode and power off automatically.
21
Publicité
